AIRBAG MAN – CR5027HP- Defender 90

2 07 2018

Air Suspension Helper Kit for Rear Coil Springs

Price 373 Euros to Portugal, my next project, bought from ireland driverite talk to Mr. Vivek

Airbag kit includes two airbags, high pressure sleeves, airbag end protectors, air line tubing and two inflation valves, full instructions included

High Pressure kit for Heavy Towing and/or vehicles being loaded to Maximum Allowable Weights

Airbags are fitted inside coil springs to provide load carrying assistance and are easily inflated or deflated to cater for the vehicle loading

My experience regarding the fitting:

1- the best way to insert the airbags is effectively lift both rears and unscrew the rear wheels.

2- you will need to deflate the balloons as much as possible and block them the a piece of the blue tube and the red plug then you squueze them by twisting.

dont release the read plug until you put the sleeves in position

3- i was able the work out the rooting in my defender 90 as i used the T junction, which means i just needed one inlet as i will inflate both balloons with the same pressure on each side.

4- I fitted the main valve on the rear crossmember of the landy which has already hole ready.

5- i have fitted the balloons with the sleeve to protect the balloon.

6- i recommend that you protect the blue tube by using some kind of sleeves to protect from heat of exhaust and dirt.

7- While you are working on the line allow line travel therefore dont cut exactly to size.

8- minimum inflation 5 PSI Max 35PSI.

My YouTube after i fitted and inflated to 35PSI max inflation, car was not landened i increased in height a couple of cm – i believe something like 58cm to 62cm.

I again think this works on leveling the weight on the rear rear springs by not allowing the coil to compress with the weight hence keeping the landy fro sagging.